Coolquest, Inc.	Home	Products	Support	About	Contact
C++BOLD Example Design: IROD

// THIS FILE IS IN THE PUBLIC DOMAIN.
// IT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
// NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 
#ifndef _ROD_ClonesH_
#define _ROD_ClonesH_
 
#include "osc8.h"        // 5V oscillator
#include "xosc.h"        // 3.3V oscillators
#include "leds.h"
#include "resistors.h"
#include "capacitors.h"
#include "inductors.h"
#include "decoupling.h"
#include "opampsot23_5.h"
#include "voltage_regulators.h"
#include "powerswitches.h"
#include "supervisors.h"
#include "resistor_packs.h"
#include "xc95144xl_144.h"
 
clone( CP_RCHIP805, CP_R10K  );   //  10k resistor
clone( CP_RCHIP805, CP_R4_7K );   // 4.7k resistor
clone( CP_RCHIP805, CP_R1K );     //   1k resistor
clone( CP_RCHIP805, CP_R360 );    // 360  ohm resistor
// clone( CP_RCHIP805, CP_R220 ); // 220  ohm resistor
clone( CP_RCHIP805, CP_R110 );    // 110  ohm resistor
// clone( CP_RCHIP805, CP_R50 );  //  50  ohm resistor
clone( CP_RCHIP805, CP_R30 );     //  30  ohm resistor
clone( CP_RCHIP805, CP_R0 );      //   0  ohm resistor
 
clone( CP_RCHIP2010, CP_R1M_HW );  //  1M ohm, half-watt resistor
 
                                    // precision resistors
clone( CP_RCHIP805, CP_R10_2KP1 );  // 10.2 K 1%  resistor
 
 
clone( CP_R_AXIAL_D, CP_RA_1 );   //   .1 ohm resistor
 
clone( CP_MP725, CP_MP725_02 );   //   .02 ohm surface-mount power resistor
 
 
//clone( CP_CCHIP805, CP_C56PF  );    //  56 pF capacitor
clone( CP_CCHIP805, CP_C10PF  );    //  10 pF capacitor
clone( CP_CCHIP805, CP_C33PF  );    //  33 pF capacitor
clone( CP_CCHIP805, CP_C2_2NF );    //  2.2 nF capacitor
clone( CP_CCHIP805, CP_C10NF  );    //  .01 uF capacitor
clone( CP_CCHIP805, CP_C220NF );    //  .22 uF capacitor
 
clone( CP_C_RADIAL_POL_D, CP_C1800UF );  // 1800 uF polarized capacitor
clone( CP_C_RADIAL_POL_D, CP_C680UF  );  //  680 uF polarized capacitor
 
clone( CP_TDC_R_POS, CP_C594D337X0010R2T );  // 10V, 330 uF solid tantalum chip capacitor
 
                                  // 5V oscillators
clone( CP_OSC8, CP_OSC10M   );    // 10   MHz oscillator
clone( CP_OSC8, CP_OSC20M   );    // 20   MHz oscillator
clone( CP_OSC8, CP_OSC62_5M );    // 62.5 MHz
                                          // 3.3V oscillators
clone( CP_XOSC8,    CP_XOSC_25M       );    // 25   MHz oscillator, thru-hole
clone( CP_XOSC8,    CP_XOSC_50M       );    // 50   MHz oscillator, thru-hole
clone( CP_XOSC_SMT, CP_XOSC_SMT_25M   );    // 25   MHz oscillator, surface mount
clone( CP_XOSC_SMT, CP_XOSC_SMT_50M   );    // 50   MHz oscillator, surface mount
 
 
clone( CP_OPAMP_SOT23_5, CP_AD8517ART );    // op-amp in SOT23-5
clone( CP_OPAMP_SOT23_5, CP_OPA237NA  );
 
//clone( CP_TL751L, CP_TL751L05CD );          // voltage regulator in SOIC 8
clone( CP_REG103UA, CP_REG103UA_5 );          // voltage regulator in SOIC 8
 
//clone( CP_TPS203X, CP_TPS2033D );   // 1.5A power distribution switch in SOIC 8
clone( CP_TPS203X, CP_TPS2034D );   // 2.0A power distribution switch in SOIC 8
 
clone( CP_TPS3305, CP_TPS3305_33D );   // dual supervisor in SOIC 8
 
 
clone( CP_PRN11024, CP_PRN1102439R0J );  //  39  ohm isolated resistor pack
 
clone( CP_PRN11124, CP_PRN111242201J );  // 2.2K ohm bussed resistor pack
 
 
clone( CP_EXB2HV,   CP_EXB2HV560JV );    // 56   ohm isolated resistor pack
clone( CP_EXB2HV,   CP_EXB2HV222JV );    // 2.2K ohm isolated resistor pack
 
 
clone( CP_LCHIP805, CP_FERRITE120 );     // 120 ohm (@100 MHz) chip ferrite
 
clone( CP_DUAL_LED_RT, CP_DUAL_LED_RT_GRN );  // green right-angle dual LED
clone( CP_DUAL_LED_RT, CP_DUAL_LED_RT_RED );  // red   right-angle dual LED
 
clone( CP_XC95144XL_144, CP_XC95288XL_144 );  // pld pinout for 95288 is identical to that of 95144 in this package
#endif